iTIVO-HD
Quick Start Guide
Packing List
1. iTIVO-HD x 1
2. Universal 12V Adapter x 1
3. RJ45 Pigtail Cable (default) x 1
or RJ5-DB9 Cable x 1
Connection
Installing the iTIVO-HD
1. Connect
VIDEO IN
to video camera
2. Connect
VIDEO OUT
to TV monitor or digital video recorder (DVR)
3. Plug in the supplied RJ-45-DB9 cable to ECR/POS port and connect the cable to ECR, POS or PC
serial port. If the cable is too short, use a standard DB9 male-female extension cable (not supplied) to
extend the length.
NOTE 1:
If the connector of your ECR/POS serial port is not DB9, you may have to make your own
cable or modify the supplied cable. Refer to
Connection
section for pinout of iTIVO-HD.
NOTE 2:
The supplied cable has DB9 pin2 assigned to TX (of iTIVO-HD), pin3 to RX (of iTIVO-HD)
and pin5 to GND. If your cash machine is having standard serial port pinout (a.k.a DTE pinout), then it
should be no problem connecting your cash machine directly to the iTIVO-HD. Please check your
cash machine’s hardware manual before you make any connection.
4. Plug in the supplied adapter DC jack and turn on the adapter power. Upon power on, iTIVO-HD gives
a short beep and briefly displays the current firmware version on TV monitor.
Connecting iTIVO-HD to ECR/POS
PROG/COM2 Port
PC programming or event logging /
networking port. This port can be
configured as RS232 or RS485 by
internal RS232/485 jumper setting
PIN1
Power
on LED
Communication
Activity LED
Alarm/Video Loss LED
Clear Alarm Button
Front
View
Rear
View
RESET
TX
RX
PROG/COM2
GND
8 7 6 5 4 3 2 1
RT S
TX
RX
ECR-POS/COM1
8 7 6 5 4 3 2 1
CT S
OUT
IN
GND
GND
Pinout
Video In
Connect to Camera
ECR-POS/COM1 Port
Connect to ECR/POS
serial port. Use the
supplied RJ45-DB9 cable
for cable conversion
Video Out
Connect to DVR
or Monitor
Important Note
This package does not contain application software,
user menu, and other supporting documents. Please
download the latest software and documents here:
http://www.iLinkPro.com
DC Power Jack
Connect to supplied
12VDC adapter
