Mounting & Installation
Technical Data
Typical Schematic
Maximum Load:
40 Amp @ 50ºc
Maximum Channel Current:
10 Amp
Load Protection:
Provided by installer
Control Supply:
150mA quiescent current. (Recommended: 200mA 15V DC Supply)
Terminal Sizes:
Channel screw terminals: 8 x 2.5mm
2
iCANnet™ input/output screw terminals: 5 x 1mm
2
DALI input screw terminals: 2 x 1.5mm
2
Alarm input screw terminals: 3 x 2.5mm
2
Installation:
Installation must be carried out by a suitably qualified electrician
Load Data:
Load types - this unit is designed to work with most lighting load types. Please consult with the iLight
help desk for guidance on true load calculations. Care should be taken when specifying discharge
lighting sources with power factor capacitors.
4 x 10A relays, 120 – 250V AC +/-10%, 50/60 Hz, Volt free
DC switching - Max 24V DC - 10A
Control:
Via iLight network connection or a compatible DALI controller
Recommended Network Cable:
iCANnet
TM
Network Cable
Programming:
Via Device Editor software
Weight:
0.25kg
Operating temperature:
+2ºC to +50ºC
Max storage temperature:
+60ºC
Humidity:
+5 to 95% non-condensing
Environmental protection:
IP20
SCMS0410
4 Channel x 10 Amp Switching Controller
Doc No: 9850-000821-01
SCMS0410 must be mounted in a suitable enclosure to provide regulatory
protection from electric shock hazard as well as protecting the iCANnet
data network from tampering that could lead to reduced network security.
Ensure selected enclosure provides adequate cooling ventilation.
Fixing to DIN rail
1. Fix top clips over DIN rail.
2. Pull down bottom clip using screwdriver.
3. Close module towards DIN rail.
4. Push up bottom clip to fix securely to DIN rail.
Removing from DIN rail
1. Pull down bottom clip with screwdriver.
2. Lift module away from DIN rail.
1
2
3
4
1
2
Control Plate
iCANnet
SCMS0410
Network Sensor
Lighting Source
Controller
E&OE. iLight reserve the right to make
changes to the equipment without
prior notice.
© Signify Holding
iLight
Usk House, Lakeside
Llantarnam Park,
Cwmbran,
NP44 3HD, UK
t: +44 (0)1923 495495
www.iLight.co.uk
EU Authorised Representative
Cooper Lighting Netherlands B.V.
High Tech Campus
HTC 48
Eindhoven
5656 AE
Installation Guide
Dimensions
DATA
STATUS
ALARM
IDENT
IN1 COM IN2
iCANnet Network
+V
CAN
H
SHIELD
CAN
L
0V
DA
DA
DALI
SCMS0410
ALARM
90 mm
60 mm
73 mm
