Ilife Beetles, Руководство пользователя, Страница: 7 / 12

PAGE 14 PAGE 15
4.Product Maintaining 4.Product Maintaining
4.1 Cleaning Side brush and Cloth
4.2 Cleaning Dust bin and filters
4.3 Cleaning cliff sensors
4.Product Maintaining
Clean the side brushes, roller brushes, and rags as they become dirty; replace them
if the side brushes, roller brushes, and wipes are damaged. Note: the left and right
brush specifications inconsistency, distinguish between the L side and R side,
you need about the corresponding.
Notes:Roller brush removal method: press the bottom of the host roll cover
plate on the buckle, you can remove the roller brush to clean; wiping disassembly
method: hand gently pull the cloth to pull, install, will Wipe the bottom of the machine
at the bottom of the paste can be cured.
After each use, please clean the dust box, filter, and clean. The specific operation is as follows:
After removing the dust box, please check whether there is any foreign matter
in the suction port, please clean it. Primary filters are replaceable accessories,
use 15-30 days of water rinse once, and placed in a cool ventilated place dry, not squeeze.
High-efficiency filter can be cleaned by patting, not recommended for direct washing.
Notes:
Clean the sensor and the charging pole with a cleaning tool or a soft cloth,
as shown in the following figure:
Charging seat on the charging pole piece of foreign body also need to promptly clean up.
Notes:
14
PAGE 3 PAGE 2
2.1
2.3
2.
Product Introduction
Robot anatomy
Bumper
CLEAN Button
Cliff Sensors
Auto Charging Pins
Nose Wheel
Side Brush
Battery Cover
Turbo Brush
Wheel Module
Dust Bin/Water Tank
Dust Bin/Water Tank
Power Supply Socket
Power Switch
2.2 Dust bin
Primary Filter
Efficient filter
Fine filter cotton
Dust bin cover
Dust bin key Dust bin key
Dust bin key
Watertank
Watertank box
Water input hole
Mop clothes stent
Mop clothes
Product Introduction
2.
3