3
IMPORTANT - Please read carefully before operating machine.
Safety begins with education, and continues with proper
application. All personnel who operate your machine
should read the supplied Operator’s Manual for
information on how to properly operate it. The likelihood
of accidents and miscuts will be greatly reduced.
General Safety
•
Safety glasses must be worn to reduce the possibility
of eye injury while operating or in the immediate
vicinity of key cutting equipment.
•
Always turn machine off before making adjustments or
inserting or removing keys.
•
Machine should be located in an area accessible only
by authorized operators. Location must be such that
customers and other personnel are not subject to
potential injury from “flying chips”.
•
Do not defeat safety features built into your machine.
Removal or modification of safety shields, cutter
guards, and other safety devices should be strictly
forbidden.
•
At no time should the mechanically-driven parts of the
machine be touched while it is in operation. The
operator should take care to ensure that loose-fitting
clothing, long hair, etc. are kept from the area of
machine operation.
•
Your machine has been specially designed and built
for key cutting purposes only and should be operated
according to the Operator’s Manual. All other uses are
strongly discouraged as potentially dangerous, and
should not be attempted! Such use will immediately
void the machine’s warranty.
•
Some states have specific age restriction concerning
the operation of certain types of equipment. Check
local and state ordinances for compliance.
Electrical Safety
•
(120 Volt models) Your machine is designed to
operate using 120 Volt A. C. 60 Hz. electrical current.
It is supplied with a three-prong power plug which
should be used with a properly grounded three-prong
outlet only. Do not defeat the safety purpose of the
plug by modifying or using with non-grounded outlets!
•
To reduce risk of fire or electrical shock, do not expose
or operate machine in damp or wet locations.
•
Electrical problems should be referred to qualified
repair technicians. If the machine is under warranty,
contact KABA ILCO at the address printed on the
cover. (KABA ILCO also offers repair service for out-
of-warranty machines. Contact KABA ILCO for
details.)
•
Always unplug the machine before removing the hood
or changing the cutter wheel.
Grounding Instructions
•
In the event of a malfunction or breakdown, grounding
provides a path of least resistance for electric current
to reduce the risk of electric shock. This machine is
equipped with an electric cord that has an equipment-
grounding conductor and a grounding plug. The plug
must be plugged into a machine outlet that is properly
installed and grounded in accordance with all local
codes and ordinances.
•
Do not modify the plug provided - if it will not fit the
outlet, have the proper outlet installed by a qualified
electrician.
•
Improper connection of the equipment-grounding
conductor can result in a risk of electric shock. The
conductor with insulation that has a green outer
surface (with or without yellow stripes) is the
equipment-grounding conductor. If repair or
replacement of the electric cord or plug is necessary,
do not connect the equipment-grounding conductor to
a live terminal.
•
Check with a qualified electrician or service personnel
if the grounding instructions are not completely
understood, or if in doubt as to whether the machine is
properly grounded.
•
Use
only
3-wire
extension cords that have 3-prong
grounding plugs and 3-pole receptacles that accept
the machine’s plug.
•
Repair or replace damaged or worn cords
immediately.
WARNING – SAFETY NOTICE
Содержание 008B
Страница 7: ...7 EXPLODED VIEW ...
Страница 8: ...8 EXPLODED VIEW ...
