IKUSI MAC-HOME HD, Руководство пользователя

Страница: 12 / 24

MAC HOME HD modulator guide
12
Initial configuration
NOTE. To enter a digit or character sequence on screen, use the vertical control button
to change the value of the current digit or character, and the horizontal control button to
move between digits or characters.
Position the cursor to the right of the current value and use the vertical control button to
increase or decrease the current value. Keep the control button pressed up or down to
increase or decrease the current value more quickly.
1) When the unit starts up, the start screen is displayed and
prompts to enter COUNTRY . Move the button to the right and
the cursor will flash next to the first country, then move the
button down until you find the reference country. OK to save.
* The unit automatically adjusts to the technical particularities of
this country (see parameters table).
2) Move to the left and place the arrow in LANGUAGE , then move
the button to the right and locate the required language by mo-
ving the button vertically. OK to save.
3) Move to the left through to the start screen, which shows the
model, firmware version, channel and status..
Status:

SYSTEM OK = correct status.
 NO input = input signal not detected

SYSTEM NOK = no video, CVBS mode without video at input
(black video is generated)
Change of output channel
1) From the start screen, move the button to the right through to the
OUTPUT CHANNEL ; the cursor will blink next to the channel.
2) Use horizontal scrolling to move between the digits and vertical
scrolling to change the value. OK to save.
Advanced mode
From the start menu, move a step to the right and down to locate
the ADVANCED MODE screen.
General
From the GENERAL screen, move the button to the right to access
the following menus:
Block LCD and Joystick
1) Locate and select the LCD BLOCK to lock access to the confi-
guration of the unit from the LCD display and using the control
button.
a) Enable (ON) or disable (OFF) the locking option.
b) Set a code to unlock the unit whenever this option is enabled.
INPUT
>OUTPUT
OUTPUT CHANNEL
21
ATTENUATION
0.0 dB
COUNTRY
>LANGUAGE
>AVANCED MODE
CODE BLOCK
OFF 0000
>COUNTRY
SPAIN
MAC HOME HD 1.00
CH 21 SYSTEM OK
MAC HOME HD 1.00
CH 21 SYSTEM OK
>LCD BLOCK
RESET FACTORY