TECHNICAL SPECS
CB70
T>0ºC
5”
06- CHARGER AND BATTERY
06- CHARGER AND BATTERY
BT24IK
AC Power Supply
230 Vca +/- 10%, 50
Opti onal
115 Vca, 60 Hz
DC Power Supply
from 10,5 V to 35 V
Voltage
4,8 V
Capacity
2400 mAh NiMH
Charging temperature
From 0º to 45ºC
Discharge temperature
From -20º to 50ºC
Autonomy
From 12 to 18 h (use at 50%)
Charging mode
Fast (<2h) and intelligent
Weight
156,3 g
SETTING UP
STATUS LEDs
RECOMMENDATIONS
• Do not recharge the batt ery unti l it is completely fl at. The transmitt er indicates this moment.
• Always charge the batt eries at temperatures between 0º and 45ºC (the batt eries will not become fully charged at
temperatures exceeding 45ºC). Remember that the charger must not be left in direct sunlight.
• Charge the batt eries at least once every six months.
• Avoid short-circuits between the batt ery contacts. Do not carry charged batt eries in toolboxes or next to other
metal objects (keys, coins, etc.).
• Always keep contacts clean.
• Never leave batt eries in direct sunlight.
The batt ery charger has two charging compartments that can simultaneously charge two batt eries.
Connect the charger to the mains using the power source and cable supplied; The red LED will switch.
The batt ery charger
has two charging
compartments that
can simultaneously
charge two batt e-
ries.
Connect the charger
to the mains using
the power source
and cable supplied;
The red LED will
switch.
When installing the
batt ery charger,
bear in mind batt e-
ries must be char-
ged at temperatures
over 0ºC.
Place the batt eries
in the charger.
Wait about 5 seconds
between the con-
secuti ve inserti ons
of batt eries in their
locati ons.
Each batt ery locati on has a green indicator associated:
-Green LED blinking
:
batt ery excessively unloaded.
-Green LED permanently lighti ning:
normal charging operati on mode
-Green LED switched OFF:
batt ery char-
gin process has fi nished.
