5
Ikusi Flow guide
Step 4 : Install the rest of the FLOW modules
Extract, one by one, the rest of the FLOW modules from the boxes numbered as
4
, and insert them in any of the free slots.
Put it in the rails and slide it until the connectors reach the end.
In the case of processing of encrypted TV channels, insert the CAMs and the operator smartcards in the FLOW SEC modules.
Step 5: Install FLOW COVER
Extract the lower deflector plate from the box numbered as
5
and insert it in FLOW BASE, as it is shown in the picture. The
lower deflector plate will allow to gather the coaxial cables. Repeat the same process with the upper deflector plate. Finally,
put the cover. If the cover is properly inserted, the fans will start spinning.
2.1 Wall mounting
Step 1: Install FLOW BASE
Extract FLOW BASE from the box numbered as
1
. The following figure describes the steps that must be followed in order to
install FLOW BASE in the wall.
Following steps
Repeat steps 2 through 5 as per the Cabinet Rack Installation.
The headend is for indoor use only.
