IKUSI 4328, Руководство по установке

Страница: 2 / 16

Regulatory information
UK
This equipment has been tested and found to comply with
the essential requirements of the following Regulations:
The Radio Equipment Regulations 2017, The Electrical
Equipment (Safety) Regulations 2016, Electromagnetic
Compatibility Regulations 2016. This product is in
accordance with The Waste Electrical and Electronic
Equipment Regulations 2013. Hereby, Telecommunication
Technology LLC declares that FLOW-STB-4K IP HDMI with
the radio equipment type 802.11a/b/g/n/ac is in compliance
with the Radio Equipment Regulations 2017. The full text of
the declaration of conformity is available at the following
internet address:
www.Ikusi.eu/eng/support/declarations
This device is certified for indoor deployment only in the
5150-5350 MHz band. Do not install or use this device
outdoors in that frequency in the UK.
EU
This equipment has been tested and found to comply with
the essential requirements of the following Directives:
2014/30/EU, 2014/35/EU, 2014/53/EU, 2009/125/EC,
2011/65/EU. This product is in accordance with Directive
WEEE 2012/19/EU.
Hereby, Telecommunication Technology LLC declares that
FLOW-STB-4K IP HDMI with the radio equipment type
802.11a/b/g/n/ac is in compliance with the 2014/53/EU
Directive. The full text of the EU declaration of conformity is
available at the following internet address: www.Ikusi.eu/
eng/support/declarations
This device is certified for indoor deployment only in the
5150 – 5350 MHz band. Do not install or use this device
outdoors in that frequency in the European Union.
FCC
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when
the equipment is operated in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference
to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment to an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
FCC Caution:
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: