3
3.
Pairing with Bluetooth devices
How to enter pairing mode
Function
Operation
LED
indicator
Indication tone
Enter pairing mode
Ensure the receiver is turned off,
otherwise turn it off first and
then press and hold MFB button
for 6
～
7 seconds until LED
flashes red and blue alternately
LED
flashes red
and blue
alternately
Two
“DU” tones
Remark:
The pairing mode will last 2 minutes, the receiver IKBT12 will switch to standby
mode automatically if no devices can be connected within 2 minutes.
Pairing with Bluetooth mobile phone
Ensure your mobile phone supports A2DP profile. The pairing procedures will vary
depending on different models of mobile phones. Please refer to your mobile phone user’s
manual for further information. The general pairing procedures are as follows:
1)
Place the receiver and Bluetooth mobile phone where they are easily viewable by no
more than 1 meter apart;
2)
Enter the receiver’s pairing mode (please refer to “How to enter pairing mode);
3)
Activate your mobile phone’s Bluetooth function and set your mobile phone to search for
Bluetooth devices within range, and select “ikross” from the list of devices shown;
4)
According to the indication, enter password or PIN No: “0000”;
5)
If prompted by your mobile phone to connect, select “Yes” (This will vary among mobile
phone models);
6)
After successful connecting, blue LED flashes twice quickly every 5 seconds
Remarks:
If no devices can be connected within 5 minutes, the receiver will then turn off
automatically in order to save power.
After successful pairing, the receiver and the mobile phone will remember each other,
they will no need to re-pair next time.