Ikra IAT 40-3025 LI, Руководство по эксплуатации

Страница: 17 / 56

GB
| Operating Instructions
GB-5
- Contact with ejecting parts of the cutting thread, cut
material, and other materials (cutting injury, blunt
injury)
- Loss of hearing if required ear protection is not used
while working (hearing loss)
- Contact with electric current due to a defective or cut
supply cable (electric shock)
- Harmful emissions of cut material and cut particles.
If you do not observe the instructions contained in the
instruction manual, other residual risks may result due
to improper use.
The product is intended for persons who are 14 years old
and up. If the product is used by children who are 8 years
old and up or by persons with limited physical, sensory,
or mental capabilities or a lack of experience and knowl-
edge, then they must be supervised or informed regard-
ing how to use the device safely and to understand the
resulting dangers that are involved. Children are not per-
mitted to play with the device. Cleaning and maintenance
may not be completed by children without supervision.
Children should be supervised so that they do not play
with the device.
However, some residual risks remain despite the spe-
cific safety measures, safety instructions, and additional
safety regulations indicated in the operating manual, e.g.
commissioning the product unintentionally. If you do not
observe the instructions contained in the instruction man-
ual, other residual risks may result due to improper use.
Warning!
Prolonged use of a tool will subject the user to vibration
and shocks that could lead to Raynaud’s syndrome or
Carpal tunnel syndrome.
This condition reduces the ability of the hand to sense
and regulate temperature, causes numbness and a
sensation of heat, and can cause damage to the nervous
and circulatory systems and to necrosis.
Not all factors that lead to Raynaud’s syndrome are
known, but cold water, smoking, and illnesses that
impact the blood vessels and the circulatory system
and severe or long-lasting exposure to vibrations are
known to be factors that contribute to the development of
Raynaud’s syndrome. Observe the following instructions
to reduce the risk of Raynaud’s syndrome and Carpal
tunnel syndrome:
• Wear gloves and keep your hands warm.
• Make sure the device is well maintained. A tool with
loose components or with damaged or worn dampers
is prone to increased vibration.
• Always hold the handle firmly, but do not grip it con -
tinuously with excessive pressure. Take breaks often.
All of the precautions indicated above cannot exclude the
risk of Raynaud’s syndrome or Carpal tunnel syndrome.
Therefore, it is advisable in case of long-term or regular
use to monitor the condition of your hands and fingers
closely. Seek medical attention immediately if any of the
above symptoms appear.
Assembly
Attention - risk of injury! Always remove the re-
chargeable battery from the device before all work.
IInstall the protective cover (fig. 1)
• Turn the trimmer over and place it on the handle.
• Put the cover on the cutting head and guide the cutting
thread through the opening of the cover.
• Tighten the cover with both screws.
Install additional grip (fig. 2)
• Release the locking button on the hand grip
• Slide the additional grip back onto the base plate, then
the hand grip may be moved into the desired position.
• To set the locking button, release it again.
Cutting width indicator/plant protector bar (fig. 3)
Push the plant protector (5) bar onto the trimmer head
until you hear the connection snap in. The bar on the
front of the trimmer serves as a plant protector bar and
a cutting width indicator. The cutting blade only moves
within the dimensions of the unfolded bar. However, the
trimmer can also be operated with the bar folded up if
required.
Installing the guide wheel (edge trimming)
(fig. 3)
• Attach the wheel (10) to the mount from above.
Putting the machine in operation
(Fig. 4+5)
• Insert the charged battery in the trimmer until the in-
terlock latches. The rechargeable battery can only be
inserted in the trimmer in one position.
Attention: When inserting the battery do not actuate
the switch-on inhibit (8) and the on/off switch (9).
• Adopt a safe stand. Hold the trimmer in both hands.
Do not set the cutting device down on the ground.
• Press the switch-on inhibit (8) to the left or right and
actuate the switch (9). After switching on, the switch-
on inhibit (8) must no longer be held.
• In order to switch off, release the switch (9) (Fig. 5).
Directions for set length adjustment and the
use of the set as edge cutter
(Fig. 6, 7 and 8)
The tube length may be adjusted to suit your height
(Fig. 6)
• To do so, turn the ribbed plastic sleeve clockwise to
loosen the connection. Adjust the tube to the suitable
length and fasten the connection by turning the tapped
sleeve anti-clockwise.
Adjusting the tilting angle (Fig. 7):
• Press the button (3) - the trimmer head is disengaged
and can be pivoted in four positions relative to the
shaft.
Adjusting for edge trimming (Fig.8):
• Press button (11): The trimmer head may now be
turned 90°.