Ikra EM 700, Руководство по эксплуатации

Страница: 18 / 100

GB-1
Electric-Tiller
Technical specifications
Model EM 700
Rated Voltage: V~ 230
Nominal Frequency: Hz 50
Nominal Consumption: W 700
Idle speed: min
-1
430
Working width: mm 280
Working depth max.: mm
20
0
Weight: kg
7,3
Sound Pressure Level according to 2000/14/EC dB (A) 70
Vibration Level according to EN 60335-1 m/s
2
<2,5
Protection class: II; Protection system IPX4
Technical and visual changes can be made during the course of the further development and without prior notice. All
information given in these instructions for use are therefore given without guarantee. Legal claims, which are based
on the instructions for use can therefore not be made.
ENGLISH
Safety instructions
Read the operating instructions carefully and
act accordingly. Keep it for general use and later
reference.
Comply with the safety information and warning
signs on the tool.
Before operation
• The tool must be assembled correctly before use.
• The tool should be checked carefully before use. You
should only work with a tool that is in good condition.
If you notice any defect on the tool that may cause a
hazard to the operator, do not operate the tool until
such defects have been rectified.
• Replace worn or damaged parts for reasons of safety.
Use only original spare parts. Parts not produced by
the original manufacturer may have a poor fit and
possibly cause injury.
• Before use, all foreign bodies must be removed from
the working area, also pay attention to foreign bodies
during operation.
• Only work in daylight or sufficiently good artificial
light.
• Wear eye protection and face or dust mask if operating
in dusty conditions.
• Dress properly. When operating the tool, pay attention
to the following notes concerning your working
clothes:
- The use of protective gloves and rugged footwear is
recommended.
- Wear a proper hat or other headgear to contain
long hair.
- Avoid wearing loose clothing or jewellery that might
get caught in the rotating tines.
Proper use
The user is responsible for third parties while
working with the tool.
• People not acquainted with the operating instructions,
children, juveniles who have not yet reached the
minimum age for using this tool, and people under
the influence of alcohol, drugs or medication are not
allowed to use the tool.
• Only use the tool for its intended purposes.
• Keep children and pets away. All onlookers should
be kept at a safe distance from the tool when it is
operated.
• Make sure that all protective devices are fitted and in
good condition.
• Do not operate the tool near underground electric
cables, telephone lines, pipes or hoses.
• Before inserting the plug in the mains socket, make
sure that the socket ratings are correct and correspond
to those indicated on the rating label on the tool.
• The use of the tool is only permitted if the safety
distance provided by the guide bar is complied with.
• Do not operate the tool on a slope that is too steep for
safe operation. When working on slopes, slow down
your working speed and make sure you have good
footing.
• Before starting the tool, make sure that the tines are
not touching any foreign objects and are completely
free to move.
• Grip guide bar firmly with both hands. Never operate
the tool with only one hand.