A-Cam dll User Guide version 1.28 2013-04-02
13
Alerts and Error codes
During operation camera may show alerts or error codes in the viewfinder.
CALIBRATION FAILED
Sensor calibration failed. Re-try. If persistent, consult with Ikonoskop.
CARD CORRUPTED See note*
Memory card metadata corrupt. Use RECOVER to recreate memory card metadata in camera.
CARD ERROR
Memory card error. Re-mount memory card. If persistent, consult with Ikonoskop.
CARD FULL
Erase memory card. Make sure all files have been downloaded prior to erase.
CARD PROTECTED
Memory card write protection enabled. Disable memory card write protection for recording.
CARD REMOVED
Memory card removed during recording. Check latest take for corruption.
FC ERROR
Corrupt flash bad block table. REBUILD memory card. If persistent, consult with Ikonoskop.
INT. ERROR 1-7 See note*
Camera de-bug codes.
MOUNT ERROR
Memory card failed to mount correctly. Re-mount memory card. If persistent, consult with Ikonoskop.
NO CARD
Memory card not present or camera fails to recognize memory card. Insert memory card or re-mount mem-
ory card. If persistent, consult with Ikonoskop.
NO EXT TC
Failed external timecode read. Check connection. Re-try. If persistent, consult with Ikonoskop.
REBUILD FAILED
Rebuild of memory card bad block table failed. Re-try. If persistent, consult with Ikonoskop.
RTC SYNC FAILED
Real Time Clock synchronization failed. If persistent, consult with Ikonoskop.
UPGRADE FAILED
Camera firmware upgrade failed. Re-try upgrade. If persistent, consult with Ikonoskop.
WARNING BATTERY LOW
Battery level is running low. Remaining recording time from first appear calculated to 15-20 min.
* If getting “CARD CORRUPTED” or ”INT.ERROR 2-7”, do not record on memory card. Check possi-
ble card content in VIEW mode. If ok, download files and check the downloaded material. If not ok, use
RECOVER (see page 8). If successful, erase memory card and test by recording two 30 sec takes. View
takes in camera and if ok, reboot the camera to see that card mounts properly.
