5
There are no control buttons on the hood. It can
only be controlled by the remote.
Remote Control, Button Functions:
Motor on/off: Turns the motor on and off. Initial
speed of the motor is 1. Motor speed is indicated
by the illumination of LEDs in the number of the
motor operation speed. It is indicated as the
leftmost LED in speed 1, and two leftmost LEDs
in speed 2, ...
SPEED –: It is activated when the motor is
operated. Any press to this key shall lower motor
speed one level down. (minimum level is 1).
Timer Feature: Timer can be activated using
“speed –“ key. It is activated when the motor is
operated. When this key is pressed for a long
period (2 seconds), motor operation timer of 15
minutes is started. Activation of Timer function
is indicated by the flashing of rightmost LED.
Motor is turned off after 15 minutes. If the speed
is changed when timer is active, timer shall be
cancelled.
SPEED +: It is activated when the motor is
operated. Any press to this key shall increase
motor speed one level up. (maximum level is 4).
NOTE: Hood is turned off if no change is made
on the hood condition for 4 hours. In other
words, motor is turned off is motor is on only;
light is turned off if light is on only; or both are
turned off if they are on both.
Maintenance
The hood must be
unplugged or the
switch must be turned
off before maintenance
and
cleaning
processes.
Aluminium cassette
filter captures the dust and oil in the air.
Metal filter must be washed in hot soaped water or in
the dishwasher, if possible, once a month.
(60 C)
Remove the aluminium cassette filter by pressing the
spring catches on the edge. Do not mount in place
before drying. Picture 4 /
Picture 6
External surfaces of the cooker hood must be wiped
with a cloth damped with soaped water or alcohol.
Attention must be paid to avoid contact of electronic
parts with water or similar materials.
For Inox products, using commercially available inox
cleaner and maintenance products will extend the life
of your product.
Warning: Aluminium filters can be washed in
dishwashers. Colour of aluminium filters might
change after a few washes. This is normal and filters
do not need to be replaced.
If the cooker hood does not operate:
Before contacting with the service:
Make sure that the cooker hood is plugged in and
the fuse in the installation is operative; Do not
perform any process that might damage the product.
Check your cooker hood according to Table 1 before
contacting with the service. If the problem persists,
contact your dealer or an authorized service.
Service and Spare Parts:
Have your appliance installed by our authorized
services free of charge.
You may procure spare parts of your appliance from
your dealer or authorized service. Authorized service
list is supplied with the appliance in the package.
Specify the product model name that you may see
on the product label to ask for spare parts when
you contact your service or dealer. You may see
the product label when you remove the aluminium
cassette filter.
NOTE: If the remote or appliance is faulty, you
may turn off the appliance using the on/off
switch inside the appliance.
When all connections of the appliance are completed,
bring the fuse inside the appliance to open position.
Figure 4
Figure 4
USING THE APPLIANCE
B) Speed Increase
C) Speed Decrease
D) Light On/Off
A) Turning On/Off