IKOHS Chef BOT COMPACT, Руководство пользователя

Страница: 17 / 112

EN
17
MOTOR RESTING TIME
If the motor is overloaded, an error will occur to prevent overheating. The display will show E1.
To avoid this, here are some indications of resting time to allow the motor to cool:
• After using a dough program (23-27), leave the appliance to rest for at least for 15 to 20 minutes. These programs
force the engine a lot, resting time is very important.
• After using the Pulse function, allow the motor to stop for 2 or 3 minutes. Especially if it has been used for the max-
imum expected duration of 1 minute.
• After using the Chop function, let the engine rest for 10 to 30 minutes depending on the use intensity. Avoid mixing
more than 1 or 2 minutes in a row at a speed higher than 6.
• Allow about 10 minutes of rest between two soup programs.
MAX
duration
90 min 10 min
2 min 4 min
Motor speed
1 √ √ √
2 √ √ √
3 √ √ √
4 √ √
5 √ √
6 √ √
7 √ √
8 √
9 √
10 √
Speeds used per accessory
For example, error display is shown like below:
ERROR MESSAGES ON THE DISPLAY AND REMEDY
E1 E3 E5 END
MESSAGE
• Attention: Motor over-
loaded or damaged.
• Attention: No pot de-
tected. Please put pot
in place.
• Attention: No water
left. Please add water.
• End of Program.
SOLUTION
• Un-plug, an let the de-
vice cool down for an
hour. Afterwards, it is
ready for use again.
• Put pot into place.
• Switch off and add wa-
ter into bowl. Switch on
after temperature insi-
de bowl cools down.
• Press knob and return
standby mode.