P a g e
|
6
IKI Wood burning stoves | Instructions for installation and use
IKI Wood burning stoves | Finnish high-quality craftsmanship
2.
Installation of the stove
2.1 Mini-IKI and Original IKI
1.
Unpack the package and check that all parts
belonging to the stove are included in the
delivery. A: Stove B: Fire plate, gloves and
instructions (inside the ash box) C: Carrying
handle D: Chimney pipe E: Ash tool F: Glass hatch
2.
Cut the cable tie with scissors or utility knife to
unleash the carrying handle from the back of
the stove.
3.
Move the stove by carrying it from the carrying
handle and from the top of the furnace. Remove
the carrying handle after the stove is in place.
4.
Set the stove on a solid and fireproof base in
the middle of the installation place.
Baseplate’s
(A)
purpose is to set the stove into
a straight and horizontal position. You may only
open and adjust each one of the "trim screws"
(B)
in the baseplate legs a maximum of 0,4 inches
(10 mm).
