17
Fig. 17:
Push the angle scale holder (34) and angle scale (35) in the guide.
Alternate the tightening of the two nuts until the angle scale holder can no longer be
moved.
Now release the nuts so that the angle scale holder can easily slide in the guide.
Fig. 18:
Mount the stop ruler (37) and tighten the wing nuts.
Fig. 19:
Push the stop ruler (37) up against the saw blade and attach the scale as shown. The base
must be dry and free of grease.
Fig. 20:
Stick on the scale for tilting the arbour (44). The base must be dry and free of grease.
Fig. 21:
Mount the hose (46) on to the extractor connection (26).
Fig. 22:
Mount the hose on to the protective guard.
Fig. 23:
Mount the hook (36) for push stick.
Fig. 24:
Now the saw is fully mounted and ready to work.
Fig. 25:
Use the push stick.
CHANGING THE SAW BLADE
Fig. 26:
Remove the blade guard.
Fig. 27:
To remove the table insert, pull the part in the direction of the arrow.
Fig. 28:
Take out the table insert.
Fig. 29:
Insert rod A into the motor shaft and unscrew the bolt (left-handed thread).
Remove the front flange (30) of the saw blade.
Remove the saw blade.
Assembly of a new saw blade is to be done in reverse sequence.
Ensure correct position of the splitting wedge.
Fig. 30:
Now you can change or sharpen the saw blade.
Содержание XW033
