Connect the ISM as shown in the electric diagram below.
Socket
Choose a 2–5 mm mounting location for installing the chrome-plated socket. Drill the holes as
shown in the figure below.
Remove the bolt on the socket and push the wire through the biggest hole.
Use a M3×16 bolt to fasten the socket.
Note:
Connect the socket and ISM as shown in the figure in the end of this manual.
Pay attention to proper electrical connections.
a.
Long red cable (length: 1,8 m, diameter: 10 mm²), one terminal to the bottom terminal of the
motor and the other terminal to the positive (1+) terminal of the battery.
b.
Long black cable (length: 1,8 m, diameter: 10 mm²), one terminal to the bottom terminal of
the motor (1-) and the other terminal to the negative (-) terminal of the battery.
18
