2
Insert handle into the tray as shown. The Quick Release Button should
extend toward the back of the tray, diagram B, page 3. Attach and tighten
handle to tray using a 3/16” Hex Head Wrench.
Note:
When using the Nikon D300s housing, the tray must be rotated
180° so that the back of the tray is n ow facing the front of the housing.
This allows housing controls to be pulled out for proper camera
installation. Handles should always be installed so the Quick Release
Buttons extend toward the back of the housing. This will allow easy
attachment/dettachment of strobe arms.
Attaching Handle to the Tray
Handle
Guide
Pin
Quick
Release
Handle
Cap Screw Hole
Small Hole
Quick Release Button
Front of Tray
3/16” Hex Head Wrench
rotate clockwise to tighten
Lock Washer
Nylon Washer
Cap Screw
