2
No tools are needed to remove the Dome Port and attach the optional
Flat Port for the Canon EF-S 60mm Macro lens,
Diagram A
.
1. Three Thumb Screws secure the Port on the Base. Turn each Thumb
Screw counterclockwise so at least 3 to 4 threads are showing.
2. Gently lift the Dome Port off the Port Base,
Diagram B, Page 3
. If the
Port seems stuck, loosen the Thumb Screws another turn or two until
the Port can be removed.
3. REMOVE the gear sleeve.
Caution:
DO NOT leave the Port off the Port Base for extended
periods of time. This can result in debris being attracted to the Port Base
O-ring,
Diagram B, Page 3
, resulting in a bad seal.
Removing the Dome Port
Tighten
Loosen
Diagram A
Approximately 3/32” gap
will be present between
the Housing Front and
bottom of Port when
the Dome or Flat Port is
properly installed.
Thumb Screws
