18
Button(s) or control(s) do not line up
•
Ensure that nothing is preventing the camera from going into the
housing.
•
Push the camera mounting plate forward until it is flush with the
housing base plate.
•
Camera should be “tight” against the mounting plate. Check
tightness using a coin or screwdriver (preferred).
Camera is not functioning normally underwater
•
Ensure that the camera mounting plate is pushed all of the way into
the housing mounting plate.
•
Check each housing control while underwater to ensure that
they are disengaged. An inadvertently engaged control may limit
functioning of the camera.
Backscatter or “snow” in images
•
Position strobes or lights farther away from your lens and at a slight
angle.
•
Avoid using strobes in extremely low-visibility conditions.
Spare Parts
•
Housing Rear O-Ring # 0110
•
Housing Front Port Base O-ring # 0132.36
•
Waterproof bulkhead cap # 9104.5
•
Port Securing Thumbscrews (Set of 3) # 9249.6
•
Silicone lubricant resealable 2cc tube # 0184.2
