10
Inserting the Camera
1.
Remove any lanyard or neck strap which may be attached to the
camera.
2.
Check to see whether the camera’s lens will fit through the port
opening of the housing. If not, the lens will need to be removed
from the camera body and re-attached AFTER the camera body is
installed in the housing.
3.
Remove the camera mounting plate from the housing.
4.
Line the Mounting Screw up with the Camera Tripod Socket. Use a
coin or flat head screwdriver to tighten the mounting plate to the
camera.
Mounting Screw
Camera Tripod Socket
Bottom
Side
Front
5.
Pull out on the housing control knobs to move them out of the way.
6.
Insert the mounting plate into the slot on the inside bottom of the
housing. Push the camera all of the way forward until the back of
the mounting plate is flush with the back of the housing mount.
