9
CCoom
mpplleettee iinnffoorrm
maattiioonn rreeggaarrddiinngg ooppttiioonnaall aacccceessssoorriieess aavvaaiillaabbllee aatt
hhttttpp::////w
ww
ww
w..iikkeelliittee..ccoom
m//w
weebb__ttw
woo//fflliipp__uullttrraa..hhttm
mll
O
Oppttiioonnaall AAcccceessssoorriieess
((ccoonntt..))
10
U
ULLTTRRAAccoom
mppaacctt FFlliipp VViiddeeoo--0022--00551100
11
GGeenneerraall TTiippss
1. Before placing your camera in the housing, it is a good idea to
immerse the closed housing in a bucket or rinse tank to make
sure it is watertight.
2. Due to the power required to operate the camera, and LCD
screen, it is a good idea to start each dive with a fresh set
of batteries.
3. As soon as you enter the water, take a moment and check the
housing to see that it is properly sealed.
4. Next, check to see if there are any bubbles on the face of the
lens port. If there are, take your finger and remove them. If
there are bubbles on the lens port they can produce soft focus
spots in your video.
N
NO
OTTEE:: Fogging of the port glass may occur due to a variety of
environmental factors. To prevent fogging issues, always
assemble the housing in a cool, dry area, and keep the housing
out of direct sunlight. If fogging persists, insert a fresh dessicant
packet inside the housing before each day of diving (dessicant
packages are not available from Ikelite, however most camera
stores carry them).
IIkkeelliittee LLiim
miitteedd W
Waarrrraannttyy
This Ikelite product is warranted against any manufacturing
defects for a period of one year from the original date of purchase.
Defective products should be returned prepaid to Ikelite. Ikelite
will, at its discretion, repair or replace such products, and will
return to customer prepaid. All other claims of any nature are not
covered. Housing is pressure tested and warranted to 200’ (60m)
maximum underwater depth. Except as mentioned above, no other
warranty expressed or implied, applies to this Ikelite product.
RReettuurrnniinngg PPrroodduuccttss ffoorr SSeerrvviiccee
Ikelite is most interested in preforming any service to assure that
all products perform as intended. For repair or service, return the
product to the address below with your name, address, phone
number and a brief description of the problem. Evidence of
purchase date must be provided to obtain warranty service.
Normal service time is approximately 2-3 weeks.
IIkkeelliittee U
Unnddeerrw
waatteerr SSyysstteem
mss
5500 W
W 3333rrdd SSttrreeeett
IInnddiiaannaappoolliiss,, IIN
N 4466220088 U
USSAA
W
Whheenn rreettuurrnniinngg pprroodduuccttss,, sseenndd ““aattttnn.. RReeppaaiirr D
Deepptt..””
331177--992233--44552233
““ggeenneerraall qquueessttiioonnss”” ee--m
maaiill:: iikkeelliittee@
@iikkeelliittee..ccoom
m
w
ww
ww
w..iikkeelliittee..ccoom
m
Once the Video Compact
Tray is attached to the
housing, the Pro-V8 Flex
Arm easily attaches to the
Flex Mount Ball as shown.
Once attached, the Pro-V8
Lite can be repositioned
effortlessly.
H
Hoouussiinngg w
wiitthh TTrraayy aattttaacchheedd
IKELITE
LED
PRO-V8
Flex Arm
Flex Mount
Ball
Housing
Pro-V8 Lite
H
Hoouussiinngg M
Maaiinntteennaannccee
The Ikelite Digital Housing should be given the same care and
attention as your other photographic equipment. In addition to
normal maintenance we recommend that the housing be returned
to Ikelite periodically to be checked and pressure tested.
1. D
Doo N
Noott leave the camcorder and housing in direct sunlight for
prolonged periods. Heat may damage the camcorder.
2. D
Doo N
Noott ship the camcorder in the housing.
3 Keep the back o-ring clean and lightly lubricated. Only apply
enough lubricant to make the o-ring feel slick. D
Doo N
Noott ssttrreettcchh
tthhee oo--rriinngg. This light coating of lubricant will help to keep the
o-ring from drying out and reduce friction when opening and
closing the housing. Keep the area where the o-ring fits and the
sealing surface of the housing clean.
4 Rinse the housing exterior thoroughly in fresh water after each
salt water use. Dry with a soft cloth. Dry lens port to eliminate
water spotting.
After several uses in salt water, soak the housing exterior in a
mild soap solution, rinse and dry before storage. When storing
the housing, remove the back o-ring, lightly lubricate and place
in a plastic bag. Place the plastic bag with o-ring inside the
housing for safe keeping.
PPuusshh bbuuttttoonn ccoonnttrroollss require no maintenance other than rinsing in
fresh water after saltwater use. If a push button control
becomes difficult to push, or if it sticks when depressed, soak
the housing in luke warm fresh water. After a few minutes
operate the push button. If this does not correct the problem,
return the housing to Ikelite for routine maintenance.
PPrroo--VV88 VViiddeeoo LLiittee #
#66332200
The Pro-V8 LED is the easiest and most affordable way to add
valuable light to your system.The flexible pop-bead flex arm allows
the light to be repositioned effortlessly. The included flex mount
ball attaches to the Video Compact Tray. For more light, add a
second Pro-V8 LED or the Pro Video Lite 3 system with the
#9523.52 Dual Tray. Requires the #9523.51Video Compact Tray,
sold separately.
PPhhoottoo TTiippss
The number one rule in underwater videography is to eliminate
as much water between the camera and subject as possible. Get
as close as you can to the subject, then use the zoom if
necessary.
LLeennss PPoorrtt
Treat the glass in the lens port as a camera lens. After use, rinse
and gently dry the outside lens port to avoid water spotting. To
clean, use a mild soap solution or lens cleaner. Do not rinse the
inside port glass.
Do not use alcohol or window cleaner on the
Lens Port.
