Ikelite 40160AU, Руководство пользователя, Страница: 10 / 19

10
2. Align the notches in the diffuser with the Diffuser Mounts on the
front of the strobe.
DS125
3. Press the diffuser down and rotate counter-clockwise until it stops.
Choosing an Arm System
•
An aluminum ball socket arm system is recommended to
adequately support the strobe while allowing the most flexible
positioning options.
•
Most arm systems are designed for underwater use and may not
fully support the strobe above water. Be careful when transporting
the system above water.
•
The mounting point is located on the bottom of the strobe. Slide the
mount into the strobe until it stops. Be careful not to cross-thread
the screw when installing.
•
Although not necessary, you may apply a small amount of Ikelite
silicone lubricant to the screw prior to attaching the strobe mount
to avoid seizing up with long term use. DO NOT apply Loc-tite or
any other thread locking product as this may cause damage to the
strobe’s plastic components.
Diffuser mount
Notch