PM9050/D
9-inch Broadcast Monochrome Monitor
Specifications
[ GENERAL ]
Power
AC100V ~ 240V
50/60Hz, approx. 30W or less
Ambient Temperature
0°C ~ +40°C (32°F ~ 104°F) 90% or less relative humidity
External Dimension
220 X 215 X 255mm (8.66 X 8.46 X 10.04 inches)
(W x H x D)
Weight
Approx. 4.4kg (9.7lbs)
Connector
Video input : BNC type (2 systems)
Sync input : BNC type (1 system)
Remote input
Tally input
Front Panel Controls
Power ON/OFF
Video input A/B
Sync input EXT/INT
Size NOR/WIDE
Pulse cross ON/OFF
4:3/16:9
Contrast
Brightness
Remote Operation
Video input A/B
Sync input EXT/INT
4:3/16:9
RED tally ON/OFF
Acquired Safety
UL, FCC
Standard
Applicable Safety
DHHS
Standard
Standard Accessories
Remote connector, AC cable, Operation Manual
[ RATING ]
Input Signal
2 video inputs
1 sync input
Input Level
Video signal : VS 1.0Vp-p or
V 0.7Vp-p, positive
Sync signal : 0.3V ~ 0.8Vp-p, negative
Input Impedance
Video input/Video sync : 75
Ω
terminated or
high impedance bridge connection
Output Level
25Vp-p
CRT
E8069B4
Phosphor Colorimetry
6500°K
Brightness
60ft-L
Operation
Continuous
Scanning Size
Normal Scan : W160 X H120mm
< 4:3 mode>
Wide Scan : Area of 4:3 aspect ratio where the picture
height touch to the top and bottom of
escutcheon
<16: 9 mode>
Normal Scan : W160 X H90mm
[ PERFORMANCE ]
Horizontal Resolution
800TV Lines or more at center
Power Voltage
Will maintain stable picture quality with a ± 10% AC
Fluctuation
input voltage f luctuation
X-ray Radiation
Less than 0.1mR/H under normal operation
at the place 50mm away from monitor
(should not be over 0.5mR/H even when damaged)
[ VIDEO Signal System ]
Frequency Response
50Hz ~ 10MHz : 1/3-dB
Over 10MHz : Falling
From video input terminal to CRT drive output
referred to 100kHz under the rated output
Max. Gain
Approx. 35dB or more
Gain (contrast)
Continuously variable from 0 ~ max. gain
Adjustment
[ DEFLECTION SYSTEM ]
Scanning Frequency
Horizontal
15.75kHz(NTSC)
Vertical
59.94Hz(NTSC)
Sync Stability
* Stability of synchronization will be met for the following conditions;
Internal Sync
VS level change ± 6dB from the rated value
when chroma level is kept at 150%
External Sync
0.3V ~ 8Vp-p
Scanning Amplitude
Must be adjusted to the rated size of 4:3 or
16:9 aspect ratio
Deflection Distortion
Less than 1% both for
def lection linearity and raster distortion
Pulse Cross Display
Horizontal(H) : Approx. 1/4 shift
Function
Vertical(V) : Approx. 1/2 shift
Hum Oscillation
0.2mm or less
[ HIGH VOLTAGE ]
Tolerance
Approx. 12V ± 1KV (cut off)
Regulation
Less than ± 3% over the range of 0 to 200
u
A
referred to 100
u
A
[ DUAL UNITS ]
Dimensions
Design and specifications are subject to change without notice
Ikegami
IKEGAMI ELECTRONICS (U.S.A.). INC. URL:
http://www.ikegami.com
HEADQUARTERS
37 Brook Avenue, Maywood, NJ 07607 Phone : (201) 368-9171 Fax : (201) 569-1626
WEST COAST OFFICE
2631 Manhattan Beach Blvd., Redondo Beach, CA 90278 Phone: (310)297-1900 Fax (310)536-9550
SOUTHWEST OFFICE
773 Bearden, Waxahachie, TX 75167 Phone: (972)869-2363 Fax: (972)556-1057
MIDWEST OFFICE
747 Church Road, Unit C1, Elmhurst, IL 60126 Phone : (630) 834-9774 Fax : (630) 834-8689
SOUTHEAST OFFICE
5200 N.W. 33rd Avenue, Suite 111, Fort Lauderdale, FL 33309 Phone : (954) 735-2203 Fax: (954) 735-2227