12
5. Operation
5.6 Display Setting Screen
This screen is used to make the input signal display aspect ratio, horizontal and vertical
display positions and sizes, and other settings.
Screen display
Status
User
Display
Image
Color
Memory
Aspect
Over Scan
H.Position
V.Position
H.Size
V.Size
Clock
Phase
AUTO
UNDO
Normal/Full/Clear
OFF/10%/20%
-200 - +200
-200 - +200
-200 - +200
-200 - +200
0 - 100
Auto/1-48
Cancel/ADJ
Normal
OFF
0
0
0
0
50
Auto
Cancel
IN1: CH name - Signal name
IN2: CH name - Signal name
Switch behavior description
Display setting screen description
• Aspect:
Used to switch the video signal aspect ratio from Normal, Full and
Clear. The switchable types depend on the type of input signal.
HD
NTSC/PAL
Normal
1280×1024 display
Cut off on both sides
1280×960 display
Black zones at top
and bottom
Full
720×540 display
1280×1024 display
Cut off on both sides
1280×720 display
Black zones at top
and bottom
1280×1024 display
Cut off at top, bottom
and on both sides
Clear
• Over Scan:
Used to select the display size with an overscan of 10% or 20%.
• H/V. Position: Used to adjust the horizontal and vertical positions onscreen.
Move toward the plus side to shift the screen to top right.
Move toward the minus side to shift the screen to bottom left.
• H/V. Size:
Used to adjust the horizontal and vertical sizes onscreen.
Move toward the plus side to enlarge the display size.
Move toward the minus side to reduce the display size.
• Clock:
Adjusts the number of sampled dots for analog signals other than
VIDEO/S-VIDEO and DVI signals.
Increase the setting to get the sampling frequency higher. Decrease
it to get the sampling frequency lower.
Make this adjustment if vertical stripes or noises occur.
