Ikegami ISD-A35, Инструкция по эксплуатации

Страница: 27 / 60

E-22
6SHFL¿FDWLRQV
(1) Image Sensor: 1/3-inch Pixim DPS CMOS sensor
(2) Pixel Number: Approx. 410,000 pixels, 758 (H) x 540 (V)
(3) Scanning system: 525 TV lines / 59.94Hz (60 Hz with Line-
Lock ON), 2 : 1 interlace
(4) Sync system: INT/LINE-LOCK (phase adjustable) (Line-
lock not usable where the power frequency
and the camera’s vertical frequency are
different from each other or when the camera
is DC-driven)
(5) Video output: VBS 1.0Vp-p/75 ohms
MON.OUT 1.0Vp-p/75 ohms
(6) Day/Night switching: True Day/Night
(7) Resolution: Horizontal; 520 TV lines
In the high-resolution mode
(690TVL-Effective)
(8) S/N ratio: Over 50 dB/rms (AGC OFF, Detail OFF)
(9) Minimum object illumination:
0.3Lx/F1.4 (in Hyper AGC mode)
(10) Wide Dynamic Range: Built-in and Variable
(11) AGC: ON (AGC, HYPER-AGC)/OFF (LOW, MID,
HIGH) Selectable
(12) Electronic Sensitivity Built-in, On (AUTO) or Off Selectable
Control: Maximum 32 times
(13) White Balance Control: ATW/ATWex/AWC/MANU, Selectable
(14) Private Mask Setting: Built-in. Up to 8 areas
(15) Digital Noise Reduction: Built-in, On or OFF, Selectable
(16) Color rolling reduction Built-in, On or OFF, Selectable
function: (CRR function)
(17) Optimum Monitor Built-in, CRT or LCD types, Selectable
Output Selection:
(18) Camera ID: 1 Line, up to 24 characters
(alphanumeric and symbols)
(19) Local Setup: By using the switch inside the camera, it is
possible to select and set items according to
the OSD.
Camera ID, AGC ON/OFF, ATW/AWC/
MANU selection and adjustment, Sync LL/
INT switching, and phase adjustment, Wide
Dynamic Range level, Iris Level, Back light
compensation On or Off and BLC Spot area
setting, Electronic Sensitivity Up ON/OFF,