10
Note
The IP address, Subnet Mask and other settings are different with the various
customer’s operating environment and setup value depends on those environment. It
is advisable to consult with your network administrator.
If the IP address, Subnet Mask or other settings are changed, there is a possibility that
you may not to be able to make successful connection over the network. In such
cases, try to connect using Internet Explorer after ensuring an alignment of the setup of
the PC to the network settings.
3.
When you finish changing a setting value, click
at the bottom of the
screen.
The confirmation dialogue box shows up.
4.
If you want to keep it, click
to save.
If you click
, setting will not be saved.
5.
Following the on-screen instructions, restart the camera and exit the
browser.
If you have changed IP address, please reconnect with the new address.
If you have changed the HTTP port to a number other than 80, the port specification is
required when connecting via the URL. Please input in the following form:
http://[
IP address of this equipment
]
：
[
HTTP port number
]/
For example, if the IP address of this equipment is 192.168.1.100, and the port number has
been changed to 81, the URL will be the following:
http://192.168.1.100:81/
With that, we come to the end of IPv4 Network setting.
4
