E-15
8. Troubleshooting
Before asking for servicing, check the following points.
Problem
Check points
Ref. page
No power supplied
• Is the power cable plugged in tightly?
E-2 - E-3
• Is the main power switch at the “I” (ON) position?
E-3
Failure to interact
• Are the IP address and subnet mask as specified?
E-5 - E-9
with the PC
• Is the LAN cable type (straight or cross) as specified?
E-4
• Is the LAN cable tightly connected?
E-3
• Is the hub power on?
E-4
• Is connection with the hub as specified?
E-4
ERROR LED on
• The hard disk drive is in trouble. Turn off the power and
contact your local dealer or Ikegami’s Customer Service
E-2
Department.
* For troubles with the PC connected, refer to “Troubleshooting” in the Applied Instructions.
