Setting procedure for ICD-808/P, ICD-828/P, ICD-848/P (SET UP MENU)
- 2/
10
-
Select characters for an ID code. Enter the characters one by one in the ID display line
(marked with the cursor in Fig.2). Up to 16 characters are acceptable.
(a) Position the start point of the ID display line:
Select
ç
or
è
symbol and press the R or L switch.
The cursor mark will move.
(b) Selecting characters:
Use the U,D,R and L switches.
(c) Entering the characters in the ID display line:
Press the E switch.
(d) Giving blanks:
Select the SPACE and press E switch. The cursor mark will move.
(e) Clearing all the characters from the ID display line:
Select the CLEAR and press the E
(3) Setting of display position
Setting the POS and press the E switch. The ID code will appear on the regular screen.
Using the U,D,R and L switches, move the ID code to any position.
Press the E switch and the display position will be determined and the screen show in
Fig2 will appear again.
(4) Use the RET or EXIT to end the setting.
2. DAY/NIGHT set up (ICD-848/P only)
(1) Setting a DAY/NIGHT function
SET UP MENU
Move the cursor to the position shown in Fig.3
by using U and D switches.
CAMERA ID
OFF
Using the R and L switches, select DAY/NIGHT
DAY/NIGHT
AUTO
item from AUTO, B/W, COLOR and REMOTE.
SHUTTER
OFF
(2) AUTO mode
LIGHT CONT.
LENS
This mode is used for automatic changing from
GAIN
AGC
COLOR to B/W under the condition of changing to WHITE BAL.
ATW1
low light and from B/W to COLOR under the
SYNC
INT
conditions of returning to normal light.
MENU LOCK
OFF
Select AUTO from the DAY/NIGHT item. And press
the E switch. The screen of Fig.4 appears.
EXIT
CANCEL
RESET
Fig.3
Adjust the level of COLOR to B/W by using L and R
DAY/NIGHT AUTO
switches. Move to B/W? COL by using the U and
D switches and adjust the level of B/W to COLOR
by using the L and R switches.
SWITCHED LEVEL
Move to the bottom line by using the U and
COL
è
B/W
L
•
•
•
•
|
•
•
•
Η
D switch.
B/W
è
COL
L
•
•
•
•
|
•
•
•
Η
Select RET to go back to SET UP MENU or select
EXIT. And press the E switch.
RET
EXIT
Fig.4
Note: Switch Level Adjustment
-1. Setup of COL
è
B/W
When you adjust the switched level of COL
è
B/W, it switches from color to B/W in brighter
conditions, as you move the marker to H direction. But it switches from color to B/W in darker
conditions, as you move the marker to L. direction