background image

Limited Warranty:

 

 
 

Ikegami Electronics

 warrants this product and all accessories provided with it to be free of defects 

in material and workmanship for a period of 5 years after the original date of purchase.  This  
warranty does not cover damage to the product resulting from accident, misuse or  
modification. 

 
 

How the warranty works 

 

If this product, or any of the accessories supplied with it, become defective within the  
warranty period, 

Ikegami Electronics (USA) Inc

. will at its discretion repair, or replace the  

product with an equivalent unit of equal or higher value without charge.  Overland return  
transportation from 

Ikegami Electronics (USA) Inc.

. to the user is free of charge. 

 
 

How to get service 

 

Please contact 

Ikegami

 by phone for return authorization number and then return the defective unit, 

transportation prepaid and a dated proof of purchase to: 

 

Ikegami Electronics (USA) Inc.

37 

Brook Avenue

 

Maywood

, N

J

 

07607

 
 

Obtaining Technical Help/Service 

 

Web Site: www.

ikegami

.com 

Phone: (

201

368

-

9171

 

Fax: (

201

569

-

1626

 

 
 

In no event shall 

Ikegami Electronics

. be liable for Consequential Damages.

 

 

Some states do not allow exclusion or limitation of incidental or consequential damages, so the above 
limitation may not apply to you.  This warranty gives you specific legal rights, and you may also 
have other rights which vary from state to state.

 

37 Brook Avenue Maywood, NJ 07607     TEL: (201)368-9171     Fax: (201)569-1626     Web: www.ikegami.com 

Содержание DA-14








Отзывы: