IKEA TRADFRI E1524, Руководство пользователя

Страница: 5 / 24

REMOVING DEVICES FROM YOUR
REMOTE CONTROL
1. Make sure the main power switch is
turned on for the light source you want
to un-pair from your TRÅDFRI remote
control.
2. Hold the remote control close to the
light source you want to remove (no
more than 5 cm away).
3. Press and hold the pairing button
for at least 10 seconds. A red light will
shine steadily on the steering device.
Your light source will begin to dim and
flash twice to indicate that it has been
successfully un-paired.
FACTORY RESET YOUR DEVICES
For light sources:
Toggle the main switch 6 times.
For remote control:
Press the pairing button 4 times within
5 seconds.
SYNCHRONIZING
If your light source becomes
unsynchronized, press and hold the ON/
OFF button for at least 3 seconds to
return the light source to its default
setting (100% brightness, 2700K).
CHANGING THE BATTERY
When the remote control is used regularly
and as intended, the batteries will last for
approximately 2 years.
When it’s time to replace the battery, a
red LED indicator will flash when you press
any button on the remote control.
Open the battery lid and replace the
battery with a new CR2032 battery.
CAUTION!
Risk of explosion if battery is replaced
by an incorrect type. Dispose of used
batteries according to the instructions.
5