IKEA RENLIG FWM5, Руководство пользователя, Страница: 12 / 32

Cancelling the delayed start after having
started the programme:
1. Set the washing appliance to PAUSE by
pressing button 5.
2. Press button 6 once, the light relevant to
the selected delay goes off
3. Press button 5 again to start the pro-
gramme.
The Delay Start can not be selected with
DRAIN programme.
Important! The selected delay can be
changed only after selecting the washing
programme again.
The door will be locked throughout the delay
time. If you need to open the door, you must
set the appliance to PAUSE (by pressing the
button 5) and then wait a few minutes. After
you have closed the door, press the button 5
again.
Start the programme by pressing button 5
To start the selected programme, press the
button 5, the corresponding green indicator
light stops blinking. The indicator light corre-
sponding to the running phase illuminates.
The appliance starts operating and the door
is locked.
To interrupt a programme which is running,
press the button 5: the corresponding green
indicator light starts blinking.
To restart the programme from the point at
which it was interrupted, press the button 5
again. If you have chosen a delayed start,
the appliance will begin the countdown.
If an incorrect option is selected, the red indi-
cator light of the button 5 blinks 3 times.
Altering an option or a running programme
It is possible to change some options before
the programme carries them out.
Before you make any change, you must
PAUSE the appliance by pressing the button
5 .
Changing a running programme is possible
only by resetting it. Turn the programme se-
lector dial to O and then to the new pro-
gramme position. Start the new programme
by pressing the button 5 again. The washing
water in the tub will be not emptied out.
Interrupting a programme
Press the button 5 to interrupt a programme
which is running, the corresponding green in-
dicator light starts blinking.
Press the button again to restart the pro-
gramme.
Cancelling a programme
Turn the selector dial to O to cancel a pro-
gramme which is running.
You can select now a new programme.
Opening the door
After the programme has started the door is
locked. If, for any reason, you need to open
it, set firstly the appliance to PAUSE by press-
ing the button 5. After a few minutes it will be
possible to open the door.
If the door remains locked, this means that
the appliance is already heating or that the
water level is too high. In any case, do not try
to force the door!
If you cannot open the door but you need to
open it you have to switch the appliance off
by turning the selector dial to O . After a few
minutes the door can be opened (pay atten-
tion to the water level and temperature!).
After closing the door, it is necessary to select
the programme and options again and to
press button 5.
At the end of the programme
The appliance stops automatically. The indi-
cator light of button 5 and the indicator light
corresponding to the just finished washing
phase goes off. The light 7.3 illuminates. After
a few minutes the door can be opened.
If a programme or an option that ends with
water left in the tub has been selected, the
light 7.3 illuminates but the door remains
locked to indicate that the water must be
emptied out before opening the door.
Follow the below instructions to empty out
the water:
1. Turn the programme selector dial to O .
2. Select the draining or spinning pro-
gramme.
3. Reduce the spin speed if needed, by
pressing the button 3.
4. Press button 5.
ENGLISH 12