IKEA Rakall, Руководство пользователя, Страница: 7 / 20

7
A
Led light
B
Refrigerator compartment temperature
C
Button for temperature regulation and Stand-by function
LED light
LEDs last longer than traditional light bulbs, improve internal
visibility and are environmentally friendly.
Contact the Service Centre if replacement is necessary.
Refrigerator compartment
Defrosting of the refrigerator compartment is completely
automatic.
The formation of water droplets on the rear internal wall of
the refrigerator compartment indicates that the automatic
defrosting is underway.
The defrost water automatically runs into a drain outlet and
then into a container from where it evaporates.
Caution! The refrigerator accessories must not be placed in a
dishwasher.
Freezer compartment
This appliance is a refrigerator with a star freezer
compartment.
Packaged frozen food can be stored for the period of time
indicated on the packaging.
Once defrosted, food must be used within 24 hours.
Installation
The appliance must be handled and installed by two or
more persons - risk of injury. Use protective gloves to unpack
and install - risk of cuts.
Installation, including water supply (if any), electrical
connections and repairs must be carried out by a qualified
technician. Do not repair or replace any part of the appliance
unless specifically stated in the user manual. Keep children
away from the installation site. After unpacking the appliance,
make sure that it has not been damaged during transport.
In the event of problems, contact the dealer or your nearest
Aftersales Service. Once installed, packaging waste (plastic,
styrofoam parts etc.) must be stored out of reach of children -
risk of suffocation. The appliance must be disconnected from
the power supply before any installation operation - risk of
electric shock. During installation, make sure the appliance
does not damage the power cable - risk of fire or electric shock.
Only activate the appliance when the installation has been
completed.
Be careful not to damage the floors (e.g. parquet) when
moving the appliance. Install the appliance on a floor or support
strong enough to take its weight and in a place suitable for
its size and use. Make sure the appliance is not near a heat
source and that the four feet are stable and resting on the floor,
adjusting them as required, and check that the appliance is
perfectly level using a spirit level. Wait at least two hours before
switching the appliance on, to ensure that the refrigerant circuit
is fully efficient.
WARNING: When positioning the appliance, ensure the
supply cord is not trapped or damaged.
WARNING: To avoid a hazard due to instability, positioning
or fixing of the appliance must be done in accordance with
the manufacturer instructions. It’s forbidden to place the
refrigerator in such way that the metal hose of gas stove, metal
gas or water pipes, or electrical wires are in contact with the
refrigerator back wall (condenser coil).
To guarantee adequate ventilation, leave a space on both
sides and above the appliance. The distance between the rear
of the appliance and the wall behind the appliance should be 50
mm, to avoid access to hot surfaces. A reduction of this space
will increase the Energy consumption of product. Please remove
the power cord from condenser hook during installation before
connecting product to power supply.
XXXXXXXXXXXXX XXXXXXXXX
XXXXXXXXXXXXX XXXXXXXXX
XXXXXXXXXXXXX XXXXXXXXX XXXXXXXXXXXXX XXXXXXXXX
XXXXXXXXXXXXX XXXXXXXXXXXXX XXXXXXXXXXXXX
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
00000
When contacting our Service Provider, please state the codes
provided on your product’s identification plate.
The model information can be retrieved using the QR-Code
reported in the energy label. The label also includes the model
identifier that can be used to consult the
https://eprel.ec.europa.eu database portal.
*On the rating plate the article number is 8 digits
**On the rating plate the
serial number is 12 digits
Product serial number (rating plate) *
Product artical number (rating plate) **
Purchasing date
Inspection check list
Please follow the inspection checklist before using your appliance.
If any answer is NOT please follow the relevant action.
Please remember to write down the product serial number and
article number as required and attach your receipt to this page.