IKEA KOLDGRADER, Быстрый старт, Страница: 5 / 12

source (oven, stoves, radiators, cookers or
hobs) or in a place with direct sunlight.
This appliance is intended to be used at
ambient temperature ranging from 10°C to
43°C.
The correct operation of the
appliance can only be guaranteed
within the specified temperature
range.
If you have any doubts regarding
where to install the appliance,
please turn to the vendor, to our
customer service or to the
nearest Authorised Service
Centre.
It must be possible to disconnect
the appliance from the mains
power supply. The plug must
therefore be easily accessible
after installation.
Inspection checklist
Please follow the inspection checklist before
using your appliance. If any answer is "NO",
follow the relevant action. Remember to
write down the product serial number and
article number as required and attach your
receipt to this page.
Product serial number (Ser. No.):
.....................................
Product article number (Art. No.):
.....................................
Purchasing date:
.....................................
GROSS CAPACITY
BRUTTO INHALT
CLASS
KLASSE
REFRIGERATOR NET CAPACITY
KUEHLSCHRANK NUTZINHALT
XXX l
XXX l
TYPE-TYP
XXXXXXXXXX
230-240V
REFRIGERANT
KAELTEMITTEL
FREEZER NET CAPACITY
GEFRIERSCHRANK NUTZINHALT
XX l
FREEZING CAPACITY
GEFRIERVERMOEGEN
X kg/24h
DEFROST HEATER
ABTAUWIDERSTAND
XXX W
XXXXXXXXX
1.0 A 50 Hz
MODEL
XXXXXXXXXXXX
PNC
XXXXXXXXX XX
SER.N.
XXXXXXXX
XX/X/XX/X
Made in Hungary
@ Inter IKEA Systems B.V. 1999
XXXXXXXXX
P
Q
M
xxxx
xxxxx
IKEA of Sweden AB
SE 343 81 Älmhult
TYPE I
RISING TIME
LAGERZEIT BEI STORUNG
XX h
Art. No.
Ser. No.
To check If the answer is NO
Check if the tube is
inside the evapora‐
tive tray.
Put the tube inside
the evaporative tray.
Make sure gasket
seals all around the
door when the door
is closed.
Refer to the assem‐
bly instruction -
door alignment.
Check if there is no
collision between
parts/furniture while
opening and closing
the door.
Refer to the assem‐
bly instruction -
door alignment.
Install the appliance
in the built-in struc‐
ture.
Follow the assembly
instruction for the
proper installation.
Make sure that at
first installation or
after reversing the
door the appliance
stands in vertical po‐
sition for at least 4
hours before it is
connected to the
power supply.
Wait 4 hours before
connecting the ap‐
pliance to the power
supply.
ENGLISH 5
To download the full version visit www.ikea.com