IKEA 904.948.51, Руководство пользователя, Страница: 16 / 24

16 ENGLISH
Problem Possible Cause Solution
There is too much condensed
water on the rear wall of the
refrigerator.
Door was opened too frequently.
Open the door only when
necessary.
Door was not closed completely.
Make sure the door is closed
completely.
Stored food was not wrapped.
Wrap food in suitable packaging
before storing it in the appliance.
Water flows inside the
refrigerator.
The drain hole at the back of the
appliance is clogged.
Clean the drain hole with a piece
of wire.
Food products prevent water from
flowing into the water collector.
Make sure that food products do
not touch the rear plate.
Water flows on the floor.
The door is not closed well.
Refer to "Closing the door", or
refer to the troubleshooting item
below ("The door does not close
completely").
The drip pan cracks.
The IKEA after sales customer
service center will assist you on the
phone at the time of service call
request.Please refer to
www.IKEA.com/au
and select your local store for local
store phone numbers and opening
times.
The defrost water drain is clogged.
Clean the drain hole with a piece
of wire.
The doors does not close
completely.
The shelves are out of position.
Make sure the shelves are in
correct position. Refer to "Movable
shelves".
The door gaskets are dirty. Clean the door gaskets.
The appliance is not level.
Make sure the appliances
is installed in level. Refer to
"Levelling feet" or the separate
Assembly Instructions.
Error code explanation
• 6° indicator flashing: Failure of ambient
temperature sensor
• 3° indicator flashing: Defrosting sensor
failure of the refrigerator compartment
• 2° indicator flashing: Temperature sensor
failure of the refrigerator
If your appliance still is not working
properly after making the above checks,
the IKEA after sales customer service
center will assist you on the phone at the
time of service call request. Please refer to
www.IKEA.com/au
and select your local store for local store
phone numbers and opening times.