Periodic Fixture Inspection
1. The condition of the internal wiring and ceramic base will need to be inspected and tested every 4000 working hours
or at least once a year. This frequency may need to be increased if the fixture has endured rough treatment. All internal
components should only be replaced with Lightstar spare parts.
2. The lamps should be checked every 100 working hours. The lamp should be changed if the lamp becomes deformed or
damaged, otherwise explosion might occur. Defer to instructions provided by the lamp manufacturer.
3. Always check the safety shield before every use.
4. All high-voltage components (ex: voltage wires, lamp ceramic, external shield, igniter must be inspected every 100
working hours or at least once a year.
5. Outer door hinges and latching system must be checked every 250 working hours to ensure proper seating of the safety
shield. This will allow inspections of accessories and the holding clamps.
6. The condition of the internal mirror must be maintained every 250 working hours. It must be replaced whenever it
becomes either cracked or broken. It is essential for the performance of the fixture.
Specifications & Photometrics
LSC-007 Specifications
Beam Angle
9° to 60°
Build Material
Aluminum
Color Temperature
5600K
Cooling System
Air Cooled
Fixture Size
27 x 34 x 41 in.
Fixture Weight
85 lbs
Focusing
Knob Control
Head Type
HMI Fresnel 12000W
IP Class
IP23
Lamp Base
12000W / 160V / G38
Lens Size
Fresnel 19.7"
Yoke
Cast Aluminum with 1 1/8" Pin
LUX
METERS
20M
25M
30M
25500
16320
11330
LUX
METERS
20M
25M
30M
1575
1008
700
FC
FEET
65.6'
82'
98'
2369
1516
1052
FC
FEET
65.6'
82'
98'
146.3
93.6
65
