Configuration of Setting Menus
Displays a crosshair on the center of the screen.
The DH5 is equipped with Monochrome Peaking features, which highlight
the desired focus area in a bright, red outline. The operator adjusts the focus
control until the red indicator outlines on the desired area are razor sharp,
indicating optimal focus. For best results, be sure object is properly exposed.
The DSLR Scaling function will allow users to extend their DSLR camera’s
HDMI Video Output any option of four; Normal 3:2, 16:9, or Full Screen.
Convenience Made simple.
Toggles between the Blue only, Red only, Green only, & Mono Modes.
This is to help calibrate the image.
This function displays the blanking portion of the incoming signal.
Activates grid on screen to assist with framing.
This feature utilizes a full spectrum of assigned color indicators, ensuring
flawless shot exposure. Under/Over luminance warnings enable the user to
get the desired quality every time.
Displays Audio Stereo Levels.
The DH5 offers adjustable upper Clip Guide levels to accurately display
overexposed images in any shooting condition. The operator simply assigns
the upper IRE to their preference and any exposure over the set IRE limit will
flash in a vivid purple, indicating only the over exposed area.
A graphical representation of the pixels exposed in your image. The left side
of the graph represents the blacks or shadows, the right side represents the
highlights or bright areas and the middle section is mid-tones. How high the
peaks reach represent the number of pixels in that particular tone. This tool
helps you get proper exposure.
Displays currently installed firmware.
Used to update firmware when a USB containing update file is inserted.
Function Set Up 1-8
Guides
Crosshair
Peaking
Underscan
DSLR
Scaling
Zooming
Check Field
HV Delay
Grids
False Color
Audio Wave
Clip Guides
Histogram
5DII Rec.
Firmware Version
Information
Update (USB)
Guides
Toggle between the following: 80%, 90%, 15:9, 4:3, 1.5:1, 2:1, 2.35:1
Crosshair
Activates Crosshair on center of screen.
Grids
Activates grid on the screen to assist with framing.
Video Config
Brightness: 0-100
Contrast:
0-100
Chroma:
0-100
Sharpness:
0-100
Tint:
0-100
Color Temp
5600K, 6500K, 9300K, Manua
l
Backlight
Allows user to fine tune the intensity of the LCD Panel’s backlight.
Aspect
Allows user to change the aspect ratio of the image.
System Config
OSD - Language:
Choose between English & Chinese for OSD.
OSD - Duration:
Choose how long the menu stays active without activity.
OSD - Transparency:
Choose from low, medium, high, or off.
MENU Setup
- Allows 5 users to save menu settings.
System Reset
- Reset Settings to factory defaults.
Power Mode
Power ON - Monitor powers on automatically when power is applied.
Power OFF - Power button needs to be pressed in order to turn on the monitor.
Keep Last - Keep last settings
Low Battery Alarm - Warns the user when battery is low.
NOTE:
To see further options
for an active function,
hold the function key
for 2 seconds until
option mode appears.