www.ikancorp.com
713-272-8822
D5w
5.6" 3G-SDI LCD Monitor w/ Hi-Def Panel (Waveform) QUICKSTART GUIDE
User programmable function keys. For quick
access, the user may program the F1, F2 and
F3 buttons to enable frequently accessed
monitor features via the main monitor configura-
tion menu.
Allows to see the image in monochrome or only the red, blue, or green
channels.
Enabling this allows you to toggle between 3 different scopes: Waveform,
Vectorscope, and RGB Parade.
The LCD panel in this display has a native display of 1280 x 800 pixels.
A signal of any other resolution is scaled to fit this native resolution. There
may be time when it is desired to view the incoming signal without scaling.
Enabling Pixel to Pixel mode turns off the scaling and displays a 1280 x
800 pixel window of the original image. Each pixel of the panel displays
one pixel of the original image. The user may use the scroll wheel on top of
the monitor to move the window left, right. Push the scroll wheel again to
toggle up and down.
The D5 is equipped with Monochrome Peaking features which highlight
the desired focus area in a bright, red outline. The operator adjusts the
focus control until the red indicator outlines on the desired area are razor
sharp, indicating optimal focus. For the best results, be sure the subject is
properly exposed.
The False Color feature utilizes a full spectrum of assigned color indicators,
ensuring flawless shot exposure. As the camera Iris is adjusted, the subject
of the image will change color based on specific brightness values
indicating optimal exposure. See included chart for color assignments.
As an additional tool associated with the D5’s False Color feature, ikan’s
exclusive Adjustable Under Exposure and Over Exposed Waning feature
gives the operator full control of the D5 False Color brightness values. By
setting the preferred IRE exposure limits, the operator is warned when the
image exposure is exceeding or falling under the preset IRE limit, providing
customizable, full image exposure control.
The D5 offers adjustable upper Clip Guide levels to accurately display
overexposed images in any shooting condition. The operator simply
assigns the upper IRE to their preference and any exposure over the set
IRE limit will flash in a vivid purple, indicating only the over exposed area.
(Same As
F2 & F3 Key)
CONFIGURATION OF SETTING MENUS
FUNCTION SETUP
Luma Under Warn
Luma Over Warn
F1
Key
Peaking
False
Color
Clip
Guide
Underscan
DSLR
Scaling
Waveform
Check
Field
Pixel
Window
1
Window
2
HV
Delay
Guides
Crosshair
EXIT