Ikan beholder EC1, Руководство по калибровке

Страница: 12 / 27

12
4. Press “ Reset ” under both Accelerometer and Gyroscope sections. Under the Gyroscope section, you’ll
see a three colored bar graph. Make sure the gimbal is set on a flat steady surface. Once the gimbal is
steady with nothing touching or moving it, the white bar should fall to the green section. Without
touching the gimbal or moving the surface it’s on, press the “
Calibrate ” button when the white bar is in
the green section.
5. Next we’ll move to the Accelerometer side.
Here you will set the camera facing six different directions, +X, - X, +Y, -Y, +Z, -Z and press “ Calibrate ”
once the camera is steady in the corresponding position. Once you’ve successfully positioned the
camera in the correct position, the program will make a click sound and highlight that side with a blue
rectangle. Depending on if your gimbal has a straight arm or angled arm, the positioning of +X and –X
are different. Below are pictures demonstrating the correct positioning of the camera and gimbal arm.
The straight arm gimbal is listed first, followed by the angled arm pictures.