background image

Ordering spare parts

When ordering spare parts, please give:
- Machine type
- Manufacturing number, see type plate
- Item number and designation of the spare part,
  see 

www.ika.com

.

Repair

Please send instrument in for repair only after it has been cleaned and is free 
from any materials which may constitute a health hazard.

For this you should request the “

Decontamination Clearance Certificate

” from 

IKA

, or use the download printout of it from the 

IKA

 website 

www.ika.com

.

Return the instrument in its original packaging. Storage packaging is not sufficient. 
Also, please use suitable shipping package materials.

Thanks to its extensive adjustable range of speeds, its  control and feedback electronics 
and the exceptional durability of the device, the 

IKA

 Vibrax VXR basic offers a host 

of options fpr usage. The available attachments are described below. Please ask us if 
require special attachments. All attachment can simply be placed on the agitation table 
and fastened in place with the clamping screws.

• 

VX 1 one-handed attachment

• 

VX 2 Test tube attachment

For further accessories see 

www.ika.com

If the motor is locked or if a load is placed on it resulting in a higher temperature than 
is permitted, the device is turned off automatically by the safety circuit and the control 
light flashes. To eliminate the error, the weight of the material must be reduced- allow 
the device to cool off.
The device must be turned off and backon again.

The 

IKA

 Vibrax VXR basic is maintenace-free. 

For cleaning disconnect the main plug.

It is subject only to the natural wear and tear of components and their statistical 
failure rate.
If the three silicon hoses that protect the agitation table from rotating fail, they can 
easily be replaced using laboratory material. Use asilicon hose Ø 8 x 12 mm and cut it 
off to alenght of 28.5 mm.
Please send in equipment for repair only after it has been cleaned and is free from any 
materials which may constitute a health hazard. Only use cleansing agents which have 
been recommended by 

IKA

.

Use to remove: 

 

Dyes isopropyl 

alcohol 

 

Construction materials 

water containing tenside / isopropyl alcohol

Cosmetics 

water containing tenside / isopropyl alcohol

Foodstuffs water 

containing 

tenside 

 

Fuels water 

containing 

tenside

For materials which are not listed, please request information from 

IKA

. Wear the 

proper protective gloves during cleaning of the devices.
Electrical devices may not be placed in the cleansing agent for the purpose of cleaning.
Before using another than the recommended method for cleaning or decontaminati-
on, the user must ascertain with the manufacturer that this method does not destroy 
the instrument.

  9

Motor protection

Accessories

Maintenance and cleaning

Содержание Vibrax VXR basic






Отзывы: