13
Error codes
The fault is shown by an error code on the display (D) as following if the error occurs, e.g.
Er 4
.
Proceed as follows in such cases:
F
Switch the device switch (B) off.
F
Remove the stirrer tool and remove the instrument from the assembly.
F
Reduce the speed and switch on (instrument switch (A)) the device without the stirrer tool.
Error code
Cause
Effect
Solution
Er 8
Speed sensor fault or overload
motor off
Switch off the instrument
If the actions described fails to resolve the fault or another error code is displayed then take one of the
following steps:
- Contact the service department
- Send the instrument for repair, including a short description of the fault.
Accessories
R 472
Floor stand
R 474
Telescopic stand
R 301
Stirring shaft protection
R 301.1
Support holder
R 303
Stirring shaft protection
Permitted IKA
®
stirrer tools
Max. Speed rpm
R 1345
Propeller stirrer
≤ 800
R 2302
Propeller stirrer
≤ 600
R 1385
Propeller stirrer
≤ 800
R 1388
Propeller stirrer
≤ 400
R 1302
Dissolver stirrer
≤ 1000
Warranty
In accordance with
IKA
®
warranty conditions, the
warranty period is 24 months. For claims under
the warranty please contact your local dealer. You
may also send the machine direct to our factory,
enclosing the delivery invoice and giving reasons
for the claim. You will be liable for freight costs.
Max. Speed rpm
R 1355
Centrifugal stirrer
≤ 800
R 1376
Paddle stirrer
≤ 800
R 2311
Paddle stirrer
≤ 600
R 1333
Anchor stirrer
≤ 800
R 4765
Floor stand
SI 400
Safety switch
SI 472
Fixing device
SI 474
Fixing device
The warranty does not cover worn out parts, nor
does it apply to faults resulting from improper use,
insufficient care or maintenance not carried out in
accordance with the instructions in this operating
manual.
