IKA RO 10 Скачать руководство пользователя страница 2

9

 Declaration of conformity

We declare under our sole responsibility that this product is in compliance with the regulations 2014/35/EU, 2014/30/EU and 2011/65/
EU and conforms to the standards or normative documents: EN 61010-1, EN 61010-2-010, EN 61010-2-051, EN 61326-1, EN 60529 
and EN ISO 12100.

 Explication of warning symbols

DANGER

CAUTION

WARNING

This symbol identifies informaton 

that is of absolute importance to ensure health and safety

. Failure 

to observe this information may be detrimental to health or may result in injuries.

This symbol indicates information 

witch is important for ensuring that the appliance functions 

without any technical problems

.

Failure to observe this information could damage the appliance.

This symbol indicates information 

which is important for proper use of the appliance and / or 

ensuring that the appliance functions correctly. 

Failure to observe this information can lead to inaccurate results.

ATTENTION - Risk of damage due to magnetism.

DANGER - Reference to the endangerment by a hot surface

EN

General hazard.

ATTENTION

 Contents

  

Page

Control panel and display 

  02

Contents  

09

Declaration of conformity 

  09

Warranty  

09

Explication of warning symbols 

  09

Safety instructions 

  10

Unpacking  

11

Correct use 

  11

Commissioning  

11

Safe temperature limit 

  11

DANGER

Setting the safe temperature limit 

  11

Stirring function 

  11

Eco mode 

  12

Operating modes 

  12

Direction of rotation reversal 

  12

Function heating 

  12

Maintenance and cleaning 

  12

Error codes (RT 5/10/15) 

  13

Accessories  

13

Technical data 

  14

 Warranty

In accordance with 

IKA

®

 warranty conditions, the warranty period is 24 months. For claims under the warranty please contact your 

local dealer. You may also send the machine direct to our factory, enclosing the delivery invoice and giving reasons for the claim. You 
will be liable for freight costs.
The warranty does not cover worn out parts, nor does it apply to faults resulting from improper use, insufficient care or maintenance 
not carried out in accordance with the instructions in this operating manual.

Содержание RO 10








Отзывы: