IKA MultiDrive basic, Руководство по эксплуатации

Страница: 4 / 15

6 7
Safety instructions
/// General information
› Read the operating instructions completely before starting up and follow the safety
instructions.
› Keep the operating instructions in a place where it can be accessed by everyone�
› Ensure that only trained staff work with the device�
› Follow the safety instructions, guidelines, occupational health and safety and accident
prevention regulations�
› The device must only be used in a technically perfect condition�
Caution!
› Wear your personal protective equipment in accordance with the hazard category of the
medium to be processed, there is a risk of:
- splashing of liquids
- body parts, hair, clothing and jewellery getting caught
- sharp blade edges�
!
Notice!
› Pay attention to the marked sites in Fig� 1�
/// Device setup
Caution!
› The power switch of the device must be accessed immediately, directly and without risk at
any time� If access to the power switch cannot be ensured, an additional emergency stop
switch that can be easily accessed must be installed in the work area�
!
Notice!
› Set up the device in a spacious area on an even, stable, clean, non-slip, dry and fireproof surface�
› Make sure that the ventilation slits are not blocked at back of the device�
› Ensure that the vessel and the cover is firmly attached to the drive unit prior to operating the
device�
› The drive unit cannot be operated without a closed vessel�
EU Declaration of conformity
We declare under our sole responsibility that this product corresponds to the directives 2014/35/EU,
2006/42/EC, 2014/30/EU and 2011/65EUand conforms with the following standards or normative
documents: EN 61010-1, EN 61010-2-051, EN ISO 12100, EN 61326-1 and EN 60529�
A copy of the complete EU Declaration of conformity can be requested at sales@ika�com�
Source language: German
Explication of warning symbols
/// Warning symbols
Indicates an (extremely) hazardous situation, which, if not avoided, will
result in death, serious injury�
Danger!
Indicates a hazardous situation, which, if not avoided, can result in
death, serious injury�
Warning!
Indicates a potentially hazardous situation, which, if not avoided, can
result in injury�
Caution!
Indicates practices which, if not avoided, can result in equipment damage�
Notice!
/// General Symbols
Position number
A–––
Correct/Result
Shows the correct execution or the result of an action step�
Wrong
Shows the incorrect execution of an action step�
Note
Displays action steps that require particular attention to detail�
/// Working with the device
Danger!
› Do not use the device in explosive atmospheres, it is not EX-protected�
› With substances capable of forming an explosive mixture, appropriate safety measures must
be applied, e�g� working under a fume hood�
› To avoid body injury and property damage, observe the relevant safety and accident preven-
tion measures when processing hazardous materials�
Warning!
› Only process samples that will not react dangerously to the extra energy produced through
processing� This also applies to any extra energy produced in other ways, e�g� through light
irradiation�
!
!