User Guide - Release 3.1 ENG 03/2020
iJet2L Srl
[email protected] | www.iJet2L.com
Company Confidential
Page 39
Breva Control Center
–
Maintenance Menu
–
Alignment Tab
Head alignment features are found in the Alignment menu.
If the outlines of the printed characters are not well defined or there is a misalignment between the printing
from left to right compared to that from right to left, it is necessary to check the alignment of the head and
restore it.
For verification printing, a sheet of paper to be printed on must be used.
In the Tag menu, set values such as to bring the print head to the correct distance from the sheet.
Alternatively is advised to use Startup Jig 35.
We suggest using the Setup cartridge (iJet2L Setup), setting the Print Quality to Quality level. Do not use High
Quality.
By pressing the button "Print", a print similar to the following is obtained