PAIRING
SHARE SCREEN
Pair with Android Receiver
<Auto Pair>
Requirements :
2.4G/5G Wi-Fi hotspot is enabled on the Android
receiver. (Please refer to the online UM for detail
support models.)
1. Plug the dongle into the USB port on the Android
receiver, and the dongle will pair with the receiver
automatically.
Please don't unplug the dongle while
pairing.
2. "Saved!" is displayed when the dongle is paired.
Tap the [OK] button to
fi
nish.
3. Unplug the dongle from USB port on the Android
receiver.
NOTE
<Manually Pair>
Requirements :
Android receiver is connected with LAN or WLAN.
1. Plug the dongle into the USB port on the Android
receiver, and enter the Wi-Fi SSID and password
of your o
ffi
ce to associated with the receiver in the
pairing dialog.
Recommend that you write down your Wi-
Fi SSID and password. If the input is wrong,
the receiver and dongle cannot be paired.
2. Check if the network information is entered
correctly, and then tap the [SAVE] button.
3. "Saved!" is displayed when the dongle is paired.
Tap the [OK] button to
fi
nish.
4. Unplug the dongle from USB port on the Android
receiver.
NOTE
Indicator Status in Sharing
Blinking blue : The dongle is connecting
Permanent blue : The dongle is connected
Blinking red : The dongle fails to connect with the receiver
Share screen with Android Receiver
1. Plug both USB and HDMI cables of the paired the dongle into the sender, the dongle indicator will blink in blue.
And wait for the indicator turns permanent blue.
2. Press the button on the dongle to start screen sharing. And press the button on the dongle again to stop
screen sharing.
Extend Screen
On the sender's operating system:
1) Go to the display settings.
2) Set the display mode as extended display
Hereby, iiyama Corporation declares that the radio equipment Type WP D001HU is in compliance with
Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet
address: www.iiyama.com
CE Conformity for European Countries
This Wireless Presentation HDMI Dongle complies with the requirements of the EC/EU Directive 2014/53/EU
“Radio Equipment Directive”, and 2011/65/EU “RoHS Directive”.
The electro-magnetic susceptibility has been chosen at a level that gives correct operation in residential
areas, business and light industrial premises and small-scale enterprises, inside as well as outside of the
buildings. All places of operation are characterised by their connection to the public low voltage power supply
system.
IIYAMA CORPORATION: Wijkermeerstraat 8, 2131 HA Hoofddorp, The Netherlands
Following information is only for EU-member states
The mark shown to the right is in compliance with the Waste Electrical and Electronic
Equipment Directive 2012/19/EU (WEEE). The full text of the EU declaration of conformity is
available at the following internet address: www.iiyama.com
The mark indicates the requirement NOT to dispose the equipment as unsorted municipal
waste, but use the return and collection systems according to local law.
Indicator Status in Pairing
Blinking blue : The dongle is starting up or pairing
Permanent blue : The dongle is paired successfully
Blinking red : The dongle fails to pair with the receiver
