ENGLISH
12 OPERATING THE MONITOR
OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT
TIMING shown on page 26. You are also able to adjust the picture by following the button operation
shown below. For more detailed adjustments, see page 18 for SCREEN ADJUSTMENTS.
Press the MENU Button to start the On Screen Display feature. There are additional
Menu items which can be switched by using the UP / DOWN Buttons.
Select the Menu item of the adjustment you want to make. Press the OK Buttons
and enter the menu page. Then, use the UP / DOWN Buttons to highlight the desired
adjustment item.
Press the OK Buttons again. Use the UP / DOWN Buttons to make the appropriate
adjustment or setting.
Press the EXIT Button to leave the menu, and the settings you just made would be
automatically saved.
When button operations are aborted during adjustment, On-Screen Display disappears when the
time set for the OSD Timeout has passed.
The MENU / EXIT Button can be used to return previous menu item.
Any changes are automatically saved in the memory when the On Screen Display disappears.
Turning off the power should be avoided while using the Menu.
Adjustments for Image H./V.Position, Clock and Phase are saved for each signal timing. Except
for these adjustments, all other adjustments have only one setting which applies to all signal
timings.
NOTE
For example, to correct for vertical position, select Menu item of "Display Settings". Select "V.
Position" by using the UP / DOWN Buttons. Press the OK Buttons.
Use the UP / DOWN Buttons to change the vertical position settings. The vertical position of the
overall display should be changing accordingly while you are doing this.
Press the EXIT Button lastly, it ends, all changes are saved in the memory.
