ENGLISH
OPERATING THE MONITOR 23
OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT
TIMING shown on page 46. You are also able to adjust the picture by following the button operation
shown below. For more detailed adjustments, see page 36 for SCREEN ADJUSTMENTS.
Press the MENU button to start the On Screen Display feature. There are additional
Menu items which can be switched by using the / buttons.
Select the Menu item of the adjustment you want to make. Press the OK button on
the remote control or ENTER button on the monitor and enter the menu page. Then,
use the / buttons to highlight the desired adjustment item.
Press the OK button on the remote control or ENTER button on the monitor again.
Use the / buttons to make the appropriate adjustment or setting.
Press the EXIT button to leave the menu, and the settings you just made would be
automatically saved.
The EXIT button on the remote control can be used to return previous menu item.
Any changes are automatically saved in the memory when the On Screen Display disappears.
Turning off the power should be avoided while using the Menu.
Adjustments for Image Position, Clock Frequency and Phase are saved for each signal timing.
Except for these adjustments, all other adjustments have only one setting which applies to all
signal timings.
NOTE
For example, to correct for vertical position, select Menu item of Screen. Select "Settings"
by using the
/
buttons. Press the OK button on the remote control. Next, select "VGA
Settings" by using the
/
buttons. Press the OK button on the remote control. Then, select
"V. Position" by using the / buttons.
Use the
/
buttons to change the vertical position settings. The vertical position of the
overall display should be changing accordingly while you are doing this.
Press the EXIT button on the remote control lastly, it ends, all changes are saved in the memory.
Picture Settings
Advanced Colour Settings
On
Base Colour Adjustment
Adaptive Contrast
Off
Ambient Light Sensor
Off
Picture
Network Settings
Control Setting
RS-232C
1
D
I
r
o
t
i
n
o
M
t
e
S
Energy Saving Settings
Aspect
Full
Freeze
Off
Setting
h
s
i
l
g
n
E
e
g
a
u
g
n
a
L
VGA Settings
VGA Settings
Phase
Auto Adjustment
H. Position
Clock Frequency
V. Position
