Iiyama ProLite B2080HSD, Руководство пользователя

Страница: 15 / 35

ENGLISH
10 BEFORE YOU OPERATE THE MONITOR
CONNECTING YOUR MONITOR : ProLite B2080HSD
Ensure that both the computer and the monitor are switched off.
Connect the computer to the monitor with the signal cable.
Connect the monitor to the audio equipment with the Audio Cable for computer when using the
audio features.
Connect the Power Cable to the monitor fi rst and then to the power supply.
Turn on your monitor and computer.
[Example of Connection]
<Back>
NOTE

The signal cables used for connecting the computer and monitor may vary with the type of
computer used. An incorrect connection may cause serious damage to both the monitor
and the computer. The cable supplied with the monitor is for a standard connector. If a
special cable is required please contact your local iiyama dealer or regional iiyama of
fi ce.

For connection to Macintosh computers, contact your local iiyama dealer or regional
iiyama of fi ce for a suitable adaptor.

Make sure you tighten the fi nger screws at each end of the signal cable.

The Class I pluggable equipment Type A must be connected to protective earth.

The socket-outlet shall be installed near the equipment and shall be easily accessible.
[ Collect Cables ]
A
Put the cables through the cable holder.
B
Collect cables at the back of the stand.
Computer
Power Cable
(Accessory)
D-Sub Signal Cable (Accessory)
DVI-D Cable (Accessory)
Audio Cable (Accessory)