ENGLISH
ENGLISH
19 OPERATING THE MONITOR
F
Adjust the Phase to correct horizontal wavy noise, flicker or blur in the zebra pattern.
NOTE
n
When the left side of the picture frame moves away from the left edge of the display
area during the Clock adjustment, adjust Clock and H-Position alternately.
n
Another way to make the Clock adjustment is to correct the vertical wavy lines in the
zebra pattern.
n
The picture may flicker during the Clock, H-Position and V-Position adjustment.
n
In case the picture frame is bigger or smaller than the data display area after the Clock
adjustment, repeat steps from
C
.
n
In the case that a strong flicker or blurs remain on a part of the screen, repeat the
adjustments from
E
to readjust the Clock. If the flicker or blurs still remain then set the
refresh rate to 60Hz and repeat the adjustments from step
C
.
n
Adjust the H-Position after the Phase adjustment if the horizontal position moves
during the adjustment.
C
Press the Auto Set-up Button.
D
Adjust the image manually by following procedure below when the screen has a
flicker or blur, or the picture does not fit in the display area after performing the Auto
Set-up.
E
Stretch the right side of the picture frame to the right edge of the display area by
adjusting the Clock.
G
Select “Position” in the Adjustment Program and adjust the H-Position and V-Position
s o that the frame of the cross-hatch pattern fits into the display area.
