CHeCKIng tHe COntentS OF tHe PaCKage
WiFi Module x 1
Antenna x 2
Installation manual x 1 (this document)
WiFi SPeCIFICatIOn
InStallatIOn PROCedURe
nOte
Before mounting and using the Monitor, please follow the steps below to install the WiFi module. the
installation should be performed by at least two adult persons to avoid danger and injuries.
Please make sure the power cable of the Monitor is disconnected before installation.
1. Undo the screws
2. Remove the cover
3. Plug the WiFi module
into the slot
4. Lock the screws,
tighten the antenna
1. After completing the installation, turn on the monitor, and the WiFi module will run automatically.
Click "Settings" menu on the screen, you can see the following interface.
2. Click “Wi-Fi”, enter the following WiFi setting interface. Click the icon “
”, you can turn on/off the WiFi function.
WiFi SettIngS
Wifi-Standard
：
Support 802.11 a/b/g/n/ac
Bluetooth
：
Support BT 2.1/3.0/4.0
Operating Frequency
：
2.4G & 5G(5150MHz-5250MHz indoor
use)
Antenna Type:Dipole
Antenna Gain: BT/ 2.4G Wifi 3dBi;5G wifi 4.3dBi
Antenna Impedance:50Ω
